You might drive like a saint, but can you guarantee that the person you are buying the part worn tyres off have not hit every kerb and been speed testing on the local car park gravel? How do you know if you will be safe? How do you know what you are getting, will the part worn tyre be safe at high speed or in the wet?

Here are some tried and tested guidelines to help you make a decision. Your safety, that of your passengers and other road users is the most important thing for you to consider.

Firstly, you must consider why you are thinking of buying used tyres.Have you heard of aquaplaning? Well its all physics in the end, tyres are your only contact with the road, you are not Fred Flintstone! Without good grip, your brakes and your steering will be seriously compromised and at a particular speed in the wet you could loose control.

The more tread you have the better. The sipes are designed to clear water from the road surface so that the tyre can make contact with the road. The deeper the tread, the more water can be cleared from the road, meaning the less likely you are to find yourself aqua planing. For more please visit Auto air conditioning St. Petersburg

Aquaplanning happens when a level of water builds up between the road surface and the tire and causes your brakes and steering to stop working. If this happens, ABS (anti brake system) and electronics will be of no help to you. Gravity and cause and affect, i.e. force and friction will have taken over. It really is down to science! Have you ever seen a skipping stone? It does not stop very quick.

You will find with a part worn tyre, the tread will not be as deep as on a new tyre, meaning much leass grip in nasty wet conditions. The legal limit is in fact very low, a few mm and should be seen as an absolute minimum rather than the point at which a tyre should be changed. All tyres have wear indicators that are little raised areas between the sipes. If you can see them, then the tyre manufacturer is trying to tell you they are past their safety level, steer clear of them. please!

Sometimes, tyres that have been damaged, the tyre will actually literally come apart. The tread parts company with the carcass of the tyre. Ask Top Gear star Richard Hammond what happens when the tyre laminates blew up! It caused him to crash that jet-powered car. Almost killed him. have you ever seen a truck tyre come apart? Not very nice!

A tyre should be changed every 20k to 25k miles and definetely every couple of years. Remember everytime you push the mileage beyond the limits you are endagering the public and yourself. Do not be so tight with your budget! For more please visit Auto tires St. Petersburg

A major component of a tyre is the carcass. This is made up of a entwined weave of steel wires and fabric bonded to rubber casing. The rubber compound that then goes to make the tread is wound around the carcass before being placed into a mould where pressure and heat imprint the tread, all very technical but designed to provide a very strong tyre.

Always check the carcass as it is surprisingly easy to damage (kerbs, punctures etc.) Look for obvious signs such as areas where the tread is uneven or lifted, bubbles (especially), unusual wear all around the tyre.

You can often see damage better by removing the tyre and looking inside. This is only possible if it is not mounted on the rim of the wheel. Take the sides of the tyre and pull them apart you can then see the inside, quite easily. There should be no granules, rubber or tacks inside, you shuld find the pattern inside uniform. Still holding the sidewalls apart, press the tread of the tyre down onto a step or other (not sharp!) corner. Rotate the tyre, it may make you dizzy but its important to look for any damage. 2

Do you know what a bead is? It is the part which joins the inner rim of the wheel, make sure you check it for wear and tear. Finally check the general condition of the compound, sometimes the rubber appears to be broken up or the sidewalls badly marked, please steer clear of such a part worn tyre. For more please visit brake service St. Petersburg

FUEL SAVING TIPS
Here are some tips that will save you money. It we all followed them then we would reduce the demand for petrol and other fuels. This would conserve oil and may reduce its price as well save billions of tons of greenhouse gasses. Most of these are at no cost, but require your commitment to at least try them out for a few weeks so you can see the results for yourself.

Easy things you can do. Pump up your tyres and keep at the correct pressure. At least 32 psi or higher if the manufacturer recommends. Under inflated tyres can use up to an extra 7% fuel. Check pressure every 2 weeks when tyres are cold. Faulty wheel alignment will also increase the rolling resistance of your car, which will increase your fuel consumption and wear your tyres out quickly.
Remove anything from your car boot that you do not require- an extra 30 kgs adds 2% to fuel consumption. Remove roof racks if not in use as they cause air drag. Fill up your car when you see the price reduced at a service station. There can be a price difference of 10c per litre within a week.
Buying premium-unleaded fuel will only benefit fuel economy in some cars, and it costs more to buy. Check your owner